3 thoughts on “How many procedures do diamond processing?”
Wilbur
Diamond processing process: In order to process the diamond rough and grind into various types of finished diamonds, a series of processing processes must be implemented according to steps. Generally speaking, there are four processes of cutting diamonds, namely marking, segmentation, molding and grinding. 1. Marking rough: Mainly based on the correct evaluation of diamond rough. The design is marked on the diamond with a dedicated pen. People who do this work must have a solid knowledge of gemstone, rich practical experience, and proficient in processing technology. It directly affects the economic benefits of gem cutting processing and the perfect level of the finished gem finished product. 2. Division of rough stones: For various reasons, the rough stones need to be divided. Segmentation of rough stones is also a very important job. It also directly affects the quality of diamond finished products and ultimately affects the value of diamond finished products. The important factors that need to be considered when dividing the rough stones are: shape, internal defects, dual crystals and crystalline learning characteristics of the rough stone. 3. Coarse grinding: The process of coarse grinding is to stick the gem to be grinded on a fixture, put the fixture on the card of the coarse grinding machine, and clamp the other as a cutting on the fixture. The operator clamped the long handle with his arm. When the coarse mill drives the diamond rotation, the two diamonds make the two diamonds contact each other to form and form the rogue and processed. It is also a cutting or cutting process. 4. Wind: The main components of the grinding equipment include grinding, clamping, and clamping. Strang is a technical technique with strong technical performance. It requires diamond cutting and grinding to understand a certain process, and requires rich experience. The grinding is to implement a series of processes for coarsely grinding gemstones. process.
The drill billet does not look inconspicuous. It must be carefully cut and processed to become the flashing diamonds we are accustomed to. Therefore, the diamond car worker directly affects the value of diamonds. See the following description for details. The most ideal cutting effect is of course to maintain the maximum weight of the diamond, minimize the flaws as much as possible, and fully show the beauty of the diamond to make the diamond light. The general cutting process includes the following steps:
labeled (threading): This is the first step of diamond cutting. People have rich experience and proficient in processing technology. The ultimate goal is to create the largest, cleanest and most perfect diamonds to reflect the value of diamonds as high as possible. The threading staff must pay attention to two points: that is, try to maintain the maximum weight and minimize the internal content. The threadr uses a magnifying glass to study the structure of the drilling billet. If it is a large particle diamond, this work may take several months, and it takes several minutes to the ordinary drill billet. However, no matter how small the drilling billet is small, each diamond must be checked in detail to make the correct judgment.
The thoroughs use Indian ink to mark on the drill billet, showing that the drill billet should be divided along this line. Usually, as much as possible along the natural texture direction of diamonds.
The segmentation rough: including cutting and sawing cutting.
This chopping: The splitter puts the diamond billet of the schemes on the suit, and then cuts a dental with another diamond, and then puts the square knife on the concave. On the marks, knock on the split knife with a hand with a suitable force, the diamond will be split in half or more along the texture direction.
Saw cutting: Most diamonds are not suitable for splitting. At this time, you need to cut it with a saw. Because only diamonds can cut the diamond, the saw tablet is a diamond powder and lubricant coated on the edge Phosphorus and copper cyclone. Diamonds are fixed on the clip, and the diamond can be seen at a high speed to see the diamond. Modern laser technology introduces diamond cutting, which greatly improves the processing efficiency of drilling.
For molding: The diamonds that are sawn or split are sent to the circle to play round and forming, that is, the diamonds are made into a round, heart -shaped, oval, sharp, grandmother, and grandmother. Common cutting flowers such as green shapes, or other special shapes. Because diamonds are the hardest natural substances that humans have recognized so far, only diamonds can polish diamonds, and the hardness of the diamonds is slightly different. Therefore, it is necessary to grasp the basic form of diamonds with experience when grinding: trilogy, eight -facial body, duodang body and crystal characteristics. The general method is to rotate the drill blank high -speed lathe, and then use the diamond on the other arm to round the rotating drill billet.
Pliles, polishing: On a cast iron disc with diamond powder and lubricant, the car grinds all the petals (aspect) to make the diamond emit a seductive glory. The grinding process is usually to make 8 large noodles at the bottom, and then make 16 aspects. Add a sharp bottom, a total of 25 aspects, the correct change is correct, and thus extend the triangular noodles, the kite face and waist face, a total of 33 aspects. Such a round diamonds have a total of 58 aspects. There are 57 face -to -face if there is no bottom face. Not every drill billet must go through all five processes. This depends on the characteristics of the drill billet and the goals to be achieved. Such as processing grandmother's green diamonds, there is no need to go through the "round" process. However, there are two processes for any diamond blank. This is "scratching" and "lobe, polishing". The location and angle of the petal -cut diamond -cut diamonds are accurately calculated, making the diamond the maximum glory. It can be seen that cutting the world's hardest gem -diamonds not only require advanced equipment, but also need to cut the spirit of all diamonds from rich experience, high sense of responsibility, and full attention. A diamond in the jewelry counter may be left through many countries. After several people, it becomes a diamond jewelry through processing, inlaid, and production.
With the advancement of science and technology, the introduction of laser technology and electronic computer descriptions can make the design and cutting of drill billets more accurate. Reference materials: Golden Jewelry Network
Diamond processing process: In order to process the diamond rough and grind into various types of finished diamonds, a series of processing processes must be implemented according to steps. Generally speaking, there are four processes of cutting diamonds, namely marking, segmentation, molding and grinding.
1. Marking rough: Mainly based on the correct evaluation of diamond rough. The design is marked on the diamond with a dedicated pen. People who do this work must have a solid knowledge of gemstone, rich practical experience, and proficient in processing technology. It directly affects the economic benefits of gem cutting processing and the perfect level of the finished gem finished product.
2. Division of rough stones: For various reasons, the rough stones need to be divided. Segmentation of rough stones is also a very important job. It also directly affects the quality of diamond finished products and ultimately affects the value of diamond finished products. The important factors that need to be considered when dividing the rough stones are: shape, internal defects, dual crystals and crystalline learning characteristics of the rough stone.
3. Coarse grinding: The process of coarse grinding is to stick the gem to be grinded on a fixture, put the fixture on the card of the coarse grinding machine, and clamp the other as a cutting on the fixture. The operator clamped the long handle with his arm. When the coarse mill drives the diamond rotation, the two diamonds make the two diamonds contact each other to form and form the rogue and processed. It is also a cutting or cutting process.
4. Wind: The main components of the grinding equipment include grinding, clamping, and clamping. Strang is a technical technique with strong technical performance. It requires diamond cutting and grinding to understand a certain process, and requires rich experience. The grinding is to implement a series of processes for coarsely grinding gemstones. process.
Diamond
Cutting process:
The drill billet does not look inconspicuous. It must be carefully cut and processed to become the flashing diamonds we are accustomed to. Therefore, the diamond car worker directly affects the value of diamonds. See the following description for details. The most ideal cutting effect is of course to maintain the maximum weight of the diamond, minimize the flaws as much as possible, and fully show the beauty of the diamond to make the diamond light. The general cutting process includes the following steps:
labeled (threading): This is the first step of diamond cutting. People have rich experience and proficient in processing technology. The ultimate goal is to create the largest, cleanest and most perfect diamonds to reflect the value of diamonds as high as possible. The threading staff must pay attention to two points: that is, try to maintain the maximum weight and minimize the internal content. The threadr uses a magnifying glass to study the structure of the drilling billet. If it is a large particle diamond, this work may take several months, and it takes several minutes to the ordinary drill billet. However, no matter how small the drilling billet is small, each diamond must be checked in detail to make the correct judgment.
The thoroughs use Indian ink to mark on the drill billet, showing that the drill billet should be divided along this line. Usually, as much as possible along the natural texture direction of diamonds.
The segmentation rough: including cutting and sawing cutting.
This chopping: The splitter puts the diamond billet of the schemes on the suit, and then cuts a dental with another diamond, and then puts the square knife on the concave. On the marks, knock on the split knife with a hand with a suitable force, the diamond will be split in half or more along the texture direction.
Saw cutting: Most diamonds are not suitable for splitting. At this time, you need to cut it with a saw. Because only diamonds can cut the diamond, the saw tablet is a diamond powder and lubricant coated on the edge Phosphorus and copper cyclone. Diamonds are fixed on the clip, and the diamond can be seen at a high speed to see the diamond. Modern laser technology introduces diamond cutting, which greatly improves the processing efficiency of drilling.
For molding: The diamonds that are sawn or split are sent to the circle to play round and forming, that is, the diamonds are made into a round, heart -shaped, oval, sharp, grandmother, and grandmother. Common cutting flowers such as green shapes, or other special shapes. Because diamonds are the hardest natural substances that humans have recognized so far, only diamonds can polish diamonds, and the hardness of the diamonds is slightly different. Therefore, it is necessary to grasp the basic form of diamonds with experience when grinding: trilogy, eight -facial body, duodang body and crystal characteristics. The general method is to rotate the drill blank high -speed lathe, and then use the diamond on the other arm to round the rotating drill billet.
Pliles, polishing: On a cast iron disc with diamond powder and lubricant, the car grinds all the petals (aspect) to make the diamond emit a seductive glory. The grinding process is usually to make 8 large noodles at the bottom, and then make 16 aspects. Add a sharp bottom, a total of 25 aspects, the correct change is correct, and thus extend the triangular noodles, the kite face and waist face, a total of 33 aspects. Such a round diamonds have a total of 58 aspects. There are 57 face -to -face if there is no bottom face. Not every drill billet must go through all five processes. This depends on the characteristics of the drill billet and the goals to be achieved. Such as processing grandmother's green diamonds, there is no need to go through the "round" process. However, there are two processes for any diamond blank. This is "scratching" and "lobe, polishing". The location and angle of the petal -cut diamond -cut diamonds are accurately calculated, making the diamond the maximum glory. It can be seen that cutting the world's hardest gem -diamonds not only require advanced equipment, but also need to cut the spirit of all diamonds from rich experience, high sense of responsibility, and full attention. A diamond in the jewelry counter may be left through many countries. After several people, it becomes a diamond jewelry through processing, inlaid, and production.
With the advancement of science and technology, the introduction of laser technology and electronic computer descriptions can make the design and cutting of drill billets more accurate.
Reference materials: Golden Jewelry Network