1 thought on “Is the master who played gold choose the style based on the number of golds of the guest?”
Cheryl
Yes. Is a good gold master can be edition and production according to the needs of the customer. The production process of gold jewelry: 1. Before the production of jewelry, the factory design department must first take out the design drawings to create molds according to the drawings. This is the most important process that must be done and made. After the mold is completed, it is passed to the next connection department according to the product category. If the molds are made of chain structures (necklaces, bracelets, ankles, etc.), they are passed on to the preparation department. If it is a ring, bracelet, pendant, gold bar, etc. 2, in the preparation department, the staff processing the prototype of the product according to the mold, that is, semi -finished products or accessories, including necklace accessories, small balls or olive beads, and so on. These semi -finished products are then transferred to the chain and connect each accessory of the necklace to form a preliminary and complete necklace. 3, the work content of the oil pressure part is the same as the preparation department, and it is also the prototype of processing production products. With the prototype, it is sent to the dealerous department for plastic surgery to make the shape of gold jewelry such as ring and bracelet closer to the appearance of the finished product. 4, in the end, the gold jewelry should be sent to the Ministry of Electric and Gold for polishing and pressing, that is, to remove some impurities and dust on the surface of the gold jewelry. After further processing of professional craftsmanship, it can achieve the most finished gold jewelry. Good effect.
Yes.
Is a good gold master can be edition and production according to the needs of the customer.
The production process of gold jewelry: 1. Before the production of jewelry, the factory design department must first take out the design drawings to create molds according to the drawings. This is the most important process that must be done and made. After the mold is completed, it is passed to the next connection department according to the product category. If the molds are made of chain structures (necklaces, bracelets, ankles, etc.), they are passed on to the preparation department. If it is a ring, bracelet, pendant, gold bar, etc.
2, in the preparation department, the staff processing the prototype of the product according to the mold, that is, semi -finished products or accessories, including necklace accessories, small balls or olive beads, and so on. These semi -finished products are then transferred to the chain and connect each accessory of the necklace to form a preliminary and complete necklace.
3, the work content of the oil pressure part is the same as the preparation department, and it is also the prototype of processing production products. With the prototype, it is sent to the dealerous department for plastic surgery to make the shape of gold jewelry such as ring and bracelet closer to the appearance of the finished product.
4, in the end, the gold jewelry should be sent to the Ministry of Electric and Gold for polishing and pressing, that is, to remove some impurities and dust on the surface of the gold jewelry. After further processing of professional craftsmanship, it can achieve the most finished gold jewelry. Good effect.